Brother MFC-820CW - Manual (Page 32)

Configuring your machine for a wireless network
3 - 11
3
1
Start the BRAdmin Professional utility (from Windows ® 98/98SE/Me/2000/XP), by clicking Start /
Programs / Brother Administrator Utilities / Brother BRAdmin Professional Utilities / BRAdmin
Professional.
Note
• If the print server is set to its factory default settings without using a DHCP/BOOTP/RARP server, the
device will appear as APIPA in the BRAdmin Professional utility screen.
• You can find the node name and Ethernet address (Node Address above) by printing out the Network
Configuration List. See
Printing the Network Configuration List on page 4-20 for information on how to
print the Network Configuration List on your print server.
2
Select TCP/IP in the left frame of the main BRAdmin window.
3
Select the print server which you want to configure, in the right frame of the main BRAdmin window.
4
Select Configure Wireless Setting from the Control menu.
5
Enter a password if you have set it.
Note
By default, no password is required to change the print server settings. You can set a password to change
the print server settings. Double click the device you want to set a password. Click Control tab, and then click
Change Password. Enter the new password.
6
You can now change the print server settings.