Brother MFC-820CW - Manual (Page 38)

Control panel setup
4 - 5
4
4
Press ▲
or
▼
to select IP Address.
Press OK.
5
Press ▲
or
▼
to select Change.
Press OK.
6
Enter the IP address.
Press OK.
7
Press Stop/Exit.
3.Subnet Mask
This field displays the current subnet mask used by the machine. If you are not using DHCP or BOOTP to
obtain the subnet mask, enter the desired subnet mask. Check with your network administrator for the subnet
mask to use.
(For MFC-640CW)
1
(For Wired) Press Menu/Set, 5, 1, 3.
(For Wireless) Press Menu/Set, 5, 2, 3.
2
Select 1 to change. Enter the Subnet Mask address.
3
Press Menu/Set.
4
Press Stop/Exit.
(For MFC-820CW)
1
Press Menu.
2
Press ▲
or
▼
to select LAN.
Press OK.
3
(For Wired) Press ▲
or
▼
to select TCP/IP(Wired).
(For Wireless) Press ▲
or
▼
to select TCP/IP(WLAN)
Press OK.
4
Press ▲
or
▼
to select Subnet Mask.
Press OK.
5
Press ▲
or
▼
to select Change.
Press OK.