Brother MFC-820CW - Manual (Page 45)

Control panel setup
4 - 12
4
(For MFC-820CW)
1
Press Menu.
2
Press ▲
or
▼
to select LAN.
Press OK.
3
(For Wired) Press ▲
or
▼
to select TCP/IP(Wired).
(For Wireless) Press ▲
or
▼
to select TCP/IP(WLAN).
Press OK.
4
Press ▲
or
▼
to select APIPA.
Press OK.
5
Press ▲ or ▼ to select On or Off.
Press OK.
6
Press Stop/Exit.
3.Setup WLAN (for wireless network only)
1.Setup Wizard
The Setup Wizard guides you through the wireless network configuration. For more information, see Using
the Setup Wizard from the control panel LAN menu for a wireless network on page 3-3.
2.SecureEasySetup
The SecureEasySetup TM software allows you to configure the wireless network easier than configuring it
manually. By pushing a button on the wireless router or access point, you can complete setup and secure the
wireless network. Your router or access point must also support SecureEasySetup
TM . See Using the
SecureEasySetup TM software to configure your machine for a wireless network on page 3-8.