Brother Innov-is 85e - Manual (Page 11)

Accessories 9
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Accessories
After opening the box, check that the following accessories are included. If any item is missing or
damaged, contact your dealer.
Included accessories
The following items should also be included in the box.
Note
(For U.S.A. only)
z Foot controller: Model T
This foot controller can be used on these machine
models NS80/NS85e.
z The screw for the presser foot holder is available
through your authorized dealer.
(Part code: 132730-122)
1. 2. 3. 4. 5. 6. 7. 8. 9.
10.* 11. 12. 13. 14. 15. 16. 17. 18.
19. 20. 21. 22. 23. 24. 25. 26.
27. 28. 29. * 75/11 2 needles
90/14 2 needles
90/14 2 needles: Ball point
needle (gold colored)
No. Part Name
Part Code
No. Part Name
Part Code
Americas Others Americas Others
1 Buttonhole foot “A” XC2691-033 16 Spool cap (large) 130012-024
2 Overcasting foot “G” XE6305-101 17 Spool cap (medium) XE1372-001
3 Monogramming foot “N” XD0810-031 18 Spool cap (small) 130013-124
4 Zipper foot “I” X59370-021 19 Extra spool pin XE2241-001
5 Zigzag foot “J” (on machine) XZ5134-001 20 Spool net XA5523-020
6 Blind stitch foot “R” XE2650-001
21 Foot controller
XD0501-121 (EU area)
7 Button fitting foot “M” XE2643-001 XC8816-071 (other areas)
8 Seam ripper XZ5082-001 22 Operation manual XE2408-301
9 Bobbin (4) SA156 SFB (XA5539-151) 23 Quick reference guide XE2416-001
10 Needle set X58358-021 24 Accessory bag XC4487-021
11 Twin needle X59296-121 25 Disc-shaped screwdriver XC1074-051
12 Cleaning brush X59476-021 26 Stitch pattern plate XE2441-001
13 Eyelet punch XZ5051-001 27
Stitch pattern plate
holder
XE2238-001
14 Screwdriver (large) XC8349-021 28
Soft cover (NS85e) XC1103-022
Hard case (Others) XE2446-001
15 Screwdriver (small) X55468-021 29 Wide table (NS85e only) SA552 WT8 (XE2472-001)
NS85e Others
NS85e only