Retrieving a pattern – Brother Innov-is 85e User Manual

Page 117

Advertising
background image

Sewing the Various Built-In Decorative Patterns 115

3

—— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

d

Check the contents, and then press

(OK

key).
The contents saved in the selected pocket are
overwritten.

X

An screen appears, indicating that the
pattern is being saved in the pocket.

X

After the pattern is saved, a beep is sounded,
and the initial stitch screen appears again.

Note

z Do not turn off the sewing machine while a

pattern is being saved, otherwise the pattern
data may be lost.

Memo

z The pattern saved in the pocket can be

erased by performing the save operation

with no pattern selected.

Retrieving a pattern

a

Press

(Preset utility stitch/saved pattern

key) in the operation panel.

X

After

appears in the center of the

screen, the machine enters retrieve pattern

mode, and

appears in the lower-left

corner of the screen.

Memo

z Each time

(Preset utility stitch/saved

pattern key) is pressed, the machine switches

between the preset utility stitch mode and

the saved pattern mode. (For details on the

preset utility stitch mode, refer to “Selecting

stitch types and patterns” (page 66).

b

Press the numeric key (1 to 3) for the pocket
where the pattern is saved.

X

The saved contents of the pocket for the
selected number are retrieved.

• If nothing was saved in the selected pocket, a

beep is sounded, and the screen displayed
before the numeric key was pressed appears
again.

• To select a different pocket, use the numeric

keys to type in the number of a different
pocket.

Memo

z After a decorative stitch or character stitch

pattern is retrieved, press

(Character/

utility decorative stitch key) to combine
additional patterns with it or edit it.

Advertising