Brother HL-3140CW - Manual (Page 27)

Configuring your machine for a wireless network (For HL-3140CW, HL-3150CDW and HL-3170CDW)
21
3
g
Enter the SSID name. (For information on how to enter text: see Quick Setup Guide.)
Press OK.
h
Using a or b, choose Infrastructure when instructed.
Press OK.
i
Choose the Authentication method using a or b, and press OK.
Do one of the following:
If you chose Open System, go to step j.
If you chose Shared Key, go to step k.
If you chose WPA/WPA2-PSK, go to step l.
j Choose the Encryption type None or WEP using a or b, and press OK.
Do one of the following:
If you chose None, go to step n.
If you chose WEP, go to step k.
k Enter the WEP key you wrote down in step a. Press OK. Go to step n. (For information on how to enter
text: see Quick Setup Guide.)
l Choose the Encryption type, TKIP or AES using a or b. Press OK. Go to step m.
m Enter the WPA key you wrote down in step a and press OK. Go to step n. (For information on how to
enter text: see Quick Setup Guide.)
n
To apply the settings, choose Yes. To cancel, choose No.
Do one of the following:
If you chose Yes, go to step o.
If you chose No, go back to step f.
o The machine will attempt to connect to the wireless network you have chosen.
p If your wireless device is connected successfully, the display shows Connected.
The machine will print your machine's wireless status report. If the connection failed, check the error
code on the printed report. See Quick Setup Guide: Troubleshooting.
(Windows ® )
You have completed the wireless network setup. If you would like to continue installing the
printer driver, please choose Install Printer Driver from the CD-ROM menu.
(Macintosh)
You have completed the wireless network setup. If you would like to continue installing the
printer driver, please choose Start Here OSX from the CD-ROM menu.