Brother HL-3140CW - Manual (Page 81)

Security features
75
6
g
After configuring, click Submit.
(Wired)
After configuring, connect your machine to the IEEE 802.1x supported network. After a few minutes, print
the Network Configuration Report to check the <Wired IEEE 802.1x> Status. (See Printing the Network
Configuration Report on page 39.)
 Success
The wired IEEE 802.1x function is enabled and the authentication was successful.
 Failed
The wired IEEE 802.1x function is enabled, however, the authentication failed.
 Off
The wired IEEE 802.1x function is not available.
(Wireless)
Shortly after configuring, WLAN report will be printed automatically. Check your wireless configuration
on the report. See Printing the WLAN report (For HL-3140CW, HL-3150CDW and HL-3170CDW)
on page 40.