Brother HL-3140CW - Manual (Page 55)

Web Based Management
49
5
How to configure the SNTP protocol using Web Based
Management
5
SNTP is the protocol used to synchronize the time used by the machine for authentication with the SNTP time
server.
a Click Network, and then click Protocol.
b Select the SNTP check box to activate the setting.
c Click Advanced Setting.
 Status
Displays whether the SNTP server settings are enabled or disabled.
 SNTP Server Method
Choose AUTO or STATIC.
• AUTO
If you have a DHCP server on your network, the SNTP server will automatically obtain the address
from that server.
• STATIC
Enter the address you want to use.
 Primary SNTP Server Address, Secondary SNTP Server Address
Enter the server address (up to 64 characters).
The Secondary SNTP server address is used as a backup to the Primary SNTP server address. If the
Primary server is unavailable, the machine will contact the Secondary SNTP server. If you have a
Primary SNTP server, but no Secondary SNTP server, simply leave this field blank.
 Primary SNTP Server Port, Secondary SNTP Server Port
Enter the Port number (1 to 65535).
The Secondary SNTP server port is used as a backup to the Primary SNTP server port. If the Primary
port is unavailable, the machine will contact the Secondary SNTP port. If you have a Primary SNTP
port, but no Secondary SNTP port, simply leave this field blank.
 Synchronization Interval
Enter the number of hours between server synchronization attempts (1 to 168 hours).
 Synchronization Status
You can confirm the latest synchronization status.
d
Click Submit to apply the settings.