Brother HL-1870N User Manual
Page 130
CHAPTER 13 TROUBLESHOOTING
13-8
6. If you are having trouble printing more than one job at a time, try
increasing the IP timeout using the SET IP TIMEOUT command or
using BRAdmin.
7. If text or PCL jobs are run together, try setting the service (remote
printer) with EOT set to string number 2 (<ESC>E). For example:
SET SERVICE BRN_xxxxxx_P1 EOT 2
8. If PostScript jobs fail to print or are run together, try setting the service
(remote printer) with EOT set to string number 3 (control-D). For
example:
SET SERVICE BRN_xxxxxx_P1 EOT 3
9. If the lines of a text file are staggered, make sure that you have specified
a remote printer (rp) name of TEXT in your /etc/printcap file.
10. If you are using Sun Solaris V2.4 or earlier, there is a bug which causes
long print jobs to fail when using a print server. If you are having trouble
printing long jobs (over 1MB), add the line mx#0 to your etc/printcap
file entry.
11. If you cannot print from DEC TCP/IP Service for VMS (UCX), make
sure that you have version 2.0B or later of this software, because earlier
versions will not work with Brother print servers.