Brother HL-1870N User Manual
Page 75
CHAPTER 6 NOVELL NETWARE PRINTING
6-11
You can find the NetWare server name and MAC address by printing out the
printer configuration page. Refer to the User’s Guide for information on how to
print the configuration page on your print server.
14. Double click the appropriate print server. You will be prompted for a
password, the default password is "access".
15. Now select the NetWare tab.
16. Select Remote Printer as the Operating Mode, select the name of your
PSERVER NLM as the print server Name and select the number of the
printer from step 6 as the Printer Number.
The same service assigned by NetWare print server cannot be used for both
queue server mode and remote printer mode. If you want to enable remote printer
capabilities on a service other than the default NetWare service, you must define
new services that are enabled for NetWare and for the desired port. Refer to
in this manual for information on how to do this.
17. Click OK. And exit BRAdmin.
You must now unload the PSERVER NLM from your NetWare file server
console and then reload it in order for the changes to take effect.
As an alternative to Brother's BRAdmin application or the Novell NWADMIN
application, you can use the standard Novell PCONSOLE utility in conjunction
with Brother's BRCONFIG program to set up your print queues. BRCONFIG
program will be installed at the same time when you install the BRAdmin and
you can find the BRCONFIG in the menu "Start/Program/Brother BRAdmin
utilities".