Brother HL-1870N - Manual (Page 84)

CHAPTER 7 APPLETALK (ETHERTALK) TCP/IP PRINTING
7-2
Macintosh Configuration
Your Brother Printer is compatible with the standard Apple LaserWriter 8 printer
driver (earlier versions of the LaserWriter drivers may crash or cause PostScript
errors on large networks). If you do not have the LaserWriter 8 driver you must
install them. Consult your Macintosh documentation for instructions on how to
do this.
Before you try to use the Brother print server, you must firstly enable the
EtherTalk protocol from the Network Control Panel on the Macintosh. If the
EtherTalk protocol is not selected, or the Network Control Panel does not exist,
you must use Apple's Network Installer software to add these capabilities.
Please ensure that you install the appropriate PPD file supplied with your printer.
You will find a "BR-Script PPD installer" icon which will copy the necessary
files across from the CD-ROM supplied with the printer.
Figure 1 Typical Macintosh Installer
The above screenshot is from a Brother HL-1200 series printer driver. However,
you will see a similar screen for all Brother printers that include a Macintosh
printer driver.
Operation
Once the print server is installed and the printer is powered on, the Brother print
server AppleTalk service name (default is BRN_xxxxxx_P1_AT, where
"xxxxxx" is the last six digits of the Ethernet address (MAC address) should
appear in the Chooser.
You can find the service name and MAC address by printing out the printer
configuration page. Refer to the User’s Guide for information on how to print the
configuration page on your print server.