Brother HL-7050N - Manual (Page 109)

3 - 25 CONTROL PANEL
HL7050_US_UG_FM5.5
SETUP
Display Shows Description
LANGUAGE = ENGLISH /FRANÇAIS /...
PANEL CONTROL Subsetting Description
LOWER LCD =NONE/PAGE COUNTER/JOB
NAME
LCD DENSITY =1/2
AUTO ONLINE =ON/OFF
BUTTON REPEAT Set the time for the display message
to change when holding the + or -
button at intervals of: 0.1, 0.2, 0.3,
0.4, 0.5, 1.0, 1.5 or 2.0 seconds. The
factory setting is 0.1.
MESSAGE
SCROLL Set the time in seconds that an LCD
message will scroll across the
display. From Level 1=0.2 to Level
10=2.0. The factory setting is
Level 1.
ERROR BUZZER OFF
NORMAL There will be three sets of five
Buzzes when an error occurs.
SPECIAL Buzzes five times consecutively until
the error is cleared.
PANEL BUZZER OFF Disables buzz function when you
press the button.
ON Enables buzz function when you
press the button.
BUZZER VOLUME LOW Makes the buzz lower.
HIGH Makes the buzz higher.
POWER SAVE TIME =1MIN:240MIN
TONER LOW =CONTINUE/STOP
CONT: Continue printing even if there is a
TONER LOW error.
STOP: Stop printing if there is a TONER LOW error.
AUTO CONTINUE =OFF/ON
LOCK PANEL =OFF/ON
Turn the lock panel setting ON or OFF.
PASS NO.=###
REPRINT =ON/OFF
PAGE PROTECTION PROTECT = AUTO AUTO, OFF, LETTER, A4 OR LEGAL
EMULATION =AUTO (EPSON)/AUTO(IBM)/HP LASER JET/....