Brother HL-7050N - Manual (Page 127)

3 - 43 CONTROL PANEL
HL7050_US_UG_FM5.5
Buzz indications
The control panel has a buzzer. The buzzer will sound when one of
the control panel buttons is pressed, or the status of the printer
changes. See the table for a description of the buzzer meaings.
You can change the settings of the buzzer by using the buttons on
the control panel.
To chagne the setting of the buzzer, press the + (plus) button until
SETUP is displayed, then press the Set button. Press the + (plus)
button until ERROR BUZZER, PANEL BUZZER or BUZZER
VOLUME is displayed and press Set.
See SETUP in this chapter for a description of the buzzer settings.
Buzz
indications Conditions
A short buzz ■ When you enter any information using the button.
Two short
buzzes ■ When you come back to the top menu option after
you move forward or backward through the
menus.
■ When you move to another menu level.
Five short
buzzes ■ When an error occur.
A long buzz ■ When you set any optional menu setting.
Two long
buzzes ■ When the printer becomes online.
■ When the printer becomes READY status after a
warming up condition.
A short and a
long buzz ■ When you enter wrong information.