Brother HL-7050N - Manual (Page 163)

5 - 14 ROUTINE MAINTENANCE
HL7050_US_UG_FM5.5
Cleaning the inside of the printer
Clean the inside of the printer as follows:
1 Turn off the printer power switch, and then unplug the printer
power cord.
2 Open the top cover.
3 Take out the drum unit assembly.
When you clean the inside of the printer, pay attention to the
following:
■ If your clothes are smeared with toner, wipe off the toner
with a dry cloth and immediately wash the clothes in cold
water to avoid stains.
■ Never touch the hot fuser.
■ Be careful not to inhale the toner.
Figure 5-19
Fuser is HOT!