Brother MFC-7820N - Manual (Page 40)

Chapter 2
2 - 7
Security
You can set up your MFC with multiple levels
of security using TX Lock (MFC-7420 only),
Memory Security (MFC-7820N only) and
Setting Lock.
TX Lock (MFC-7420 only)
TX Lock lets you prevent unauthorized
access to the MFC. You will not be able to
continue to schedule Delayed Faxes or
Polling jobs. However, any pre-scheduled
Delayed Faxes will be sent even if you turn on
TX Lock, so they won’t be lost.
While TX Lock is on, the following operations
are available:
■ Receiving faxes
■
Fax Forwarding
(if Fax Forwarding was already on)
■
Paging
(if Paging was already on)
■
Remote Retrieval
(if Fax Storage was already on)
■
PC Fax Receive
(if PC Fax Receive was already on)
While TX Lock is on, the following operations
are NOT available:
■
Sending faxes
■
Copying
■
PC printing
■
PC scanning
Note
To print the faxes in memory, turn off TX
Lock.
Setting up the password
Note
■
If you have already set the password, you
will not need to set it, again.
■
If you forget the TX Lock password,
please call Brother Customer Service.
(See Brother numbers on page i.)
1
Press Menu/Set, 1, 8, 1.
2
Enter a four-digit number for the
password.
Press Menu/Set.
If you are entering the password for the
first time, the LCD shows Verify:.
3
Re-enter the password.
Press Menu/Set.
4
Press Stop/Exit.
Changing the TX Lock password
1
Press Menu/Set, 1, 8, 1.
2
Press
▲ or ▼ to select Set Password.
Press Menu/Set.
3
Enter the registered four-digit password.
Press Menu/Set.
4
Enter a four-digit number for the new
password.
Press Menu/Set.
5
If the LCD shows Verify:, re-enter the
new password.
Press Menu/Set.
6
Press Stop/Exit.
Security
1.TX Lock