Setting the print density, Polling, Setting up polling receive – Brother MFC-7820N User Manual
Page 61: Setting up sequential polling receive, Setting the print density -5 polling -5, 4setting the print density
Setup Receive
4 - 5
4
Setting the Print Density
You can adjust print density, making your
printed pages darker or lighter.
1
If it is not illuminated in green, press
(Fax).
2
Press Menu/Set, 2, 1, 6.
3
Press
▲ to make the print darker.
—OR—
Press
▼ to make the print lighter.
Press Menu/Set.
4
Press Stop/Exit.
Polling
Polling is the process of retrieving faxes from
another fax machine.
Everyone who is involved in Polling needs to
set up their machines for Polling.
Note
■
If you poll someone’s fax machine to
receive a fax, you pay for the call.
■
Some fax machines do not respond to the
Polling feature.
Setting up Polling Receive
Polling Receive is when you call another fax
machine to receive a fax from it.
1
If it is not illuminated in green, press
(Fax).
2
Press Menu/Set, 2, 1, 7.
3
Enter the fax number you are polling.
4
Press Start.
The LCD shows Dialing.
Setting up Sequential Polling Receive
Your MFC can ask for faxes from several fax
units in a single operation (Sequential Polling
Receive). Afterwards, a Sequential Polling
Report will be printed.
1
If it is not illuminated in green, press
(Fax).
2
Press Menu/Set, 2, 1, 7.
3
Enter the fax machines you want to poll
using One-Touch, Speed-Dial, a Group
or the dial pad. You must press
Menu/Set between each fax number.
4
Press Start. Your MFC will poll each
number or Group number in turn to
receive a fax.
Setup Receive
6.Print Density
Setup Receive
7.Polling RX
Setup Receive
7.Polling RX