Brother HL-S7000DN - Manual (Page 26)

26
For Wireless Network Users
Error code Recommended Solutions
TS-03
The wireless network and security setting you entered may be incorrect.
Reconfirm the wireless network settings.
* Check if the entered or selected SSID/authentication method/encryption
method/UserID/Userpass are correct.
See How can I find the wireless settings (Network Name (SSID) and Network Key)
on page 25 to confirm.
TS-04
The Authentication/Encryption methods used by the selected WLAN access point/router
are not supported by your machine.
For infrastructure mode, change the authentication and encryption methods of the WLAN
access point/router. Your machine supports the following authentication methods WPA,
WPA2, OPEN and Shared key. WPA supports TKIP or AES encryption methods. WPA2
supports AES for the encryption method. OPEN and Shared key correspond to WEP
encryption.
If your problem is not solved the SSID or network settings you entered may be incorrect.
Reconfirm the wireless network settings.
Combined table of authentication and encryption methods
Authentication method Encryption method
WPA-Personal
TKIP
AES
WPA2-Personal AES
OPEN
WEP
NONE (without encryption)
Shared key WEP
See How can I find the wireless settings (Network Name (SSID) and Network Key)
on page 25 to confirm.
For ad-hoc mode, change the authentication and encryption methods of your computer for
the wireless setting.
Your machine supports OPEN authentication method only, with optional WEP encryption.
TS-05
The security information (SSID/Network Key) is incorrect.
Reconfirm the SSID and security information (Network Key).
If your router uses WEP encryption, enter the key used as the first WEP key. Your Brother
machine supports the use of the first WEP key only.
See How can I find the wireless settings (Network Name (SSID) and Network Key)
on page 25 to confirm.
TS-06
The wireless security information (Authentication method/Encryption method/Network
Key) is incorrect.
Reconfirm the wireless security information (Authentication method/Encryption
method/Network Key) in the table of TS-04.
If your router uses WEP encryption, enter the key used as the first WEP key. Your Brother
machine supports the use of the first WEP key only.
See How can I find the wireless settings (Network Name (SSID) and Network Key)
on page 25 to confirm.