Brother HL-S7000DN - Manual (Page 3)

3
2
Load paper in the paper
tray
a
Slowly pull the paper tray out until it stops.
Then slightly lift the front of the tray and pull the
tray out of the machine.
b
While pressing the green paper-guide release
lever a, slide the paper guides to fit the paper
size you are loading in the tray. Make sure that
the guides are firmly in the slots.
c
Fan the stack of paper well to avoid paper jams
and misfeeds.
d
Put paper in the tray and make sure:
 The paper is below the maximum paper
mark (bbb) a.
Over filling the paper tray will cause paper
jams.
 The side to be printed on must be face down.
 The paper guide with the maximum paper
mark (bbb) a touches the side of the paper
so it will feed properly.
Note
For Legal or Folio size paper, press the release
button a in the bottom of the paper tray and then
pull out the back of the paper tray.
(Legal or Folio size paper are not available in
some regions.)
1
1
1
1