Brother HL-S7000DN - Manual (Page 31)

31
Macintosh
Wireless Network
Windows
®
Macinto
sh
Wirele
ss Network
Install the Printer Driver
13
Before you install
a
Make sure your machine is connected to the
power and your Macintosh is ON. You must be
logged on with Administrator rights.
14
Install the printer driver
a
Put the installation CD-ROM into your
CD-ROM drive.
b
Double-click the Start Here OSX icon.
c
Choose Wireless Network Connection and
then click Next.
d
Follow the on-screen instructions.
e
Choose your machine from the list, and then
click OK.
f
When this screen appears, click Next.
Note
• For users of Mac OS X 10.5.7 or lower,
upgrade to Mac OS X 10.5.8 - 10.7.x. (For the
latest drivers and information for the Mac OS X
you are using, visit
http://solutions.brother.com/.)
• If you want to add the PS driver (BR-Script3
printer driver), please go to the Brother
Solutions Center at
http://solutions.brother.com/ and visit FAQ’s on
your model page for instructions.
Important
DO NOT cancel any of the screens during the
installation. It may take a few minutes for the
installation to complete.
Note
If your wireless settings fail, the Wireless Device
Setup Wizard screen appears. Follow the
on-screen instructions to complete the wireless
configuration.
Note
• If there is more than one of the same model
connected on your network, the MAC Address
(Ethernet Address) will be displayed after the
model name.
• You can find your machine’s MAC Address
(Ethernet Address) and IP Address by printing
out the Printer Settings Page. See Print the
Printer Settings Page on page 32.
Note
When the Brother Support screen appears,
follow the on-screen instructions.
Finish
The installation is now
complete.