Free-motion quilting – Brother XR1300 User Manual

Page 66

Advertising
background image

64

UTILITY STITCHES —————————————————————————————————————————————————————————————————————————————————————————————————————

Using the optional quilting guide

Use the quilting guide to sew parallel stitches that
are equally spaced.

a

Insert the stem of the quilting guide into the
hole at the rear of the walking foot or presser
foot holder.

† Walking foot

† Presser foot holder

b

Adjust the stem of the quilting guide so that
the guide aligns with the seam that has
already been sewn.

Free-motion quilting

With free-motion quilting, the feed dogs can be
lowered (using the feed dog position lever) so that
the fabric can be moved freely in any direction.
The optional quilting foot is needed for free-motion
quilting.

Note

Models equipped with a needle threader

● Thread the needle manually when using the

quilting foot, or only attach the quilting foot
after threading the needle using the needle
threader.

a

Remove the presser foot and the presser foot
holder.

• For details, refer to “Removing the presser

foot holder” (page 35).

b

Align the quilting foot with the lower-left side
of the presser bar.
The pin on the quilting foot should be
positioned over the needle clamp screw.

a Pin on quilting foot
b Presser foot holder screw
c Needle clamp screw

Advertising
This manual is related to the following products: