Caution – Brother XR1300 User Manual

Page 92

Advertising
background image

90

APPENDIX ————————————————————————————————————————————————————————————————————————————————————————————————————————————

e

Remove the bobbin case.
Grasp the bobbin case, and then pull it out.

a Bobbin case

f

Use the cleaning brush or a vacuum cleaner to
remove any dust from the race and its
surrounding area.

a Cleaning brush
b Race

Note

● Do not put oil on the race.

g

Insert the bobbin case so that the S mark on
the bobbin case aligns with the
z mark on the
machine.

• Align the S and z marks.

a

S mark

b

z mark

c Bobbin case

• Make sure that the indicated points are

aligned before installing the bobbin case.

Never use a bobbin case that is scratched,

otherwise the upper thread may become
tangled, the needle may break or sewing
performance may suffer. For a new bobbin
case (part code: XE7560-001), contact your
nearest authorized service center.

Make sure that you fit the bobbin case

properly, otherwise the needle may break.

CAUTION

Advertising
This manual is related to the following products: