Brother HL 3070CW - Manual (Page 18)

18
Macintosh Wired Network
For Wired Network Interface Cable Users
8 Connect the printer to
your Macintosh and
install the driver
a
Connect the network interface cable to the LAN
connector marked with a
symbol and then
connect it to a free port on your hub.
b
Make sure the printer power switch is on.
c
Turn on your Macintosh. Put the supplied CD-
ROM into your CD-ROM drive.
d
Double-click the HL3000 icon on your desktop.
Double-click the Start Here icon. Follow the
on-screen instructions.
e
Click Install Printer Driver on the menu
screen.
f
Click Network cable users and follow the
on-screen instructions. Then, restart your
Macintosh (Mac OS X 10.3.9 only).
g
The Brother software will search for the Brother
printer. During this time the following screen
will appear.
h
Choose the printer you wish to connect, and
then click OK.
IMPORTANT
Make sure there are no USB Flash memory
drive inserted.
Note
Please see the User’s Guide on the CD-ROM to
install the PS driver (Brother’s BR-Script Driver).