Brother HL 3070CW - Manual (Page 34)

34
Macintosh Wireless Network
s
The Brother software will search for the Brother
printer. During this time the following screen
will appear.
t
Choose the printer you wish to connect, and
then click OK.
If
u
When this screen appears, click OK.
Note
• If there is more than one of the same printer
model connected on your network, the
MAC Address (Ethernet Address) will be
displayed after the model name.
• You can find your printer’s MAC Address
(Ethernet Address) and the IP Address by
printing out the Printer Settings Page. See Print
the Printer Settings Page on page 40.
• If your printer fails to appear on the list, reset
the print server back to its factory default
settings (See Reset the network settings to the
factory default on page 40) and go back to
d
on page 31 and try the wireless setup again.
Finish
The installation is now
complete.