Brother HL 3070CW - Manual (Page 21)

21
For Wireless Network Users
Wireless Network
Windows
®
Macintosh
9
Choose your wireless setup method
The following instructions will offer three methods for setting up your Brother machine in a wireless network
environment. Choose the method you prefer for your environment.
a
Configuration using the Installation CD-ROM and temporarily using a USB cable (Windows
®
only)
It is recommended that you use a PC wirelessly connected to your network for this method.
*The Network Key may also be described as the Password, Security Key or Encryption Key.
Now go to
page 23
Note
To setup your machine in any other wireless environment, you can find instructions in the Network User's
Guide.
IMPORTANT
• You need to temporarily use a USB cable during configuration (cable not included).
• If you are using Windows ® 2000, Windows ® XP, or currently using a computer connected to
an access point/router by network cable, you need to know your wireless settings. Please write
down your wireless network settings in the area below.
Item Record the current wireless network settings
SSID (Network Name)
Network Key (Security Key/Encryption Key)
IMPORTANT
Please do not contact Brother Customer Service for assistance without the wireless security
information. We cannot assist you in locating your network security settings.
Note
• If you do not know this information (SSID and Network Key), you cannot continue the wireless setup.
• How can I find this information (SSID and Network Key)?
1. You should see the documentation provided with your wireless access point/router.
2. The initial network name could be the manufacturer’s name or the model name.
3. If you do not know the security information, please consult the router manufacturer, your system
administrator, or internet provider.