Brother HL-S7000DN - Manual (Page 18)

Printing Methods
12
1
Tray exclusion setting (if the lower trays are installed)
1
If you set the Tray Use option to Auto, paper trays will be used in the order specified using the Priority
option and you can set the machine to not use paper in the bottom-most tray. For example, if Tray 2 is
installed and you have special paper loaded in Tray 2, you might set Priority to MP>T1 or T1>MP, so that
the paper in Tray 2 will not be used. (See Paper Tray uu page 79.)
Loading paper in the multi-purpose tray (MP tray)
1
You can load up to 100 sheets of plain paper in the MP tray. Use this tray to print on thick paper or bond
paper. (For the recommended paper to use, see Acceptable paper and other print media uu page 2.)
Printing on plain paper, thin paper and recycled paper from the MP tray
1
a Open the MP tray and lower it gently.
b
Pull out the MP tray support (1) and unfold the flap (2).
2
1