Brother HL-S7000DN - Manual (Page 86)

General Information
80
3
1 When optional lower trays are installed.
2 When the optional output tray is installed.
Tray3 Size
1 Any* / Letter / Legal / A4 /
Executive / JIS B5 / A5 / Folio Chooses the size of paper you loaded in this optional
lower tray.
Tray4 Size
1 Any* / Letter / Legal / A4 /
Executive / JIS B5 / A5 / Folio Chooses the size of paper you loaded in this optional
lower tray.
General Setup
Submenu Menu Selections Options Descriptions
Local Language - English* / Français... Changes the LCD language for your
country.
Density - -6 / ... / -1 / 0* / 1 / ... / 6 Increases or Decreases the print density.
Increasing the print density will darken
the printed image. When you choose
Duplex or Booklet and increase print
density, print speed will decrease
accordingly.
Ecology Sleep Time 0 / 1 / 2 / 3* / 4 / 5 / ... Min Sets the time to return to Power Save
mode.
Ink Save On / Off* Increases the page yield of the ink
cartridge.
Quiet Mode - On / Off* Decreases printing noise. When Quiet
Mode is turned on, the print speed
becomes slower.
Beeper - Low / Med / High / Off* Adjusts the beeper volume.
Panel Control Button Repeat 0.1Sec* / 0.4Sec /
0.6Sec / 0.8Sec /
1.0Sec / 1.4Sec /
1.8Sec / 2.0Sec Sets the time for the LCD message to
change when holding a or b at intervals.
Message Scroll Level1* / Level2 / ... /
Level10
Sets the time in seconds that an LCD
message will scroll across the LCD. From
Level 1=0.2 sec to Level 10=2.0 sec.
LCD Contrast -nnonn+ Adjusts the contrast of the LCD.
Auto Online On* / Off Sets the machine to automatically
return to Ready mode.
Stopper LED - On* / Off Chooses whether the output paper stopper
lights according to the machine status.
This item is available when the stopper is
set at its default Letter/A4 position.
The factory settings are shown in Bold with an asterisk.
Paper Tray (continued)
Submenu Options Descriptions
The factory settings are shown in Bold with an asterisk.