Brother HL-S7000DN - Manual (Page 68)

Driver and Software
62
2
Print Settings
2
You can change settings by choosing a setting in the Print Settings list:
 Media Type
You can change the media type to one of the following:
• Plain Paper
• Thin Paper
• Thick Paper
• Bond Paper
• Recycled Paper
 Slow Drying Paper
When using paper that dries slowly, select this option to prevent bleed-through.
 Paper Source
You can choose Auto Select, Tray1, Tray2
1
, Tray3
1
, Tray4
1
, MP Tray, Manual, Tray ID 1, Tray ID 2,
Tray ID 3 or Tray ID 4.
1 Available if this optional lower tray is installed.
 Output Tray
You can select the following paper output trays:
• Auto Select
• Standard
• Optional
1
1 Available if the optional output tray is installed.