Intermittent problems – Brother NC-2100p User Manual
Page 80
CHAPTER 9 TROUBLESHOOTING
9-5
Intermittent Problems
If the print server and printer start up OK, but you intermittently have problems
printing, check the following:
1. If the printer prints unexpectedly or it prints garbage, check the following:
1. Turn the printer power switch is off.
2. Connect the AC cord
3. Remove the AC cord from the AC outlet, and then connect it, again.
4. Turn the printer power switch is on.
2. If you can print small jobs but large graphics jobs are distorted or
incomplete, make sure that you have adequate memory in your printer and
the latest printer driver installed on your computer. The latest Brother
printer drivers can be downloaded from
3. Check the individual protocol troubleshooting sections in this chapter for
additional causes of intermittent printer problems.