Brother CS-8150 - Manual (Page 112)

UTILITY STITCHES ———————————————————————————————————————————————————————
106
2
Attach monogramming foot “N”.
• For details, refer to “Replacing the presser
foot” (page 41).
3
Select stitch
33
.
• For details, refer to “Selecting stitching”
(page 66).
4
With the right side of the fabric facing up, sew
along the right edge of the frayed section.
5
Press (settings key) in the operation panel.
X The settings screen appears.
6
Press , , and (arrow keys) until
is selected.
7
Press (OK key).
X The screen for mirror imaging the pattern
appears.
8
Press to select .
To return to , press .
X The pattern is flipped.
9
Press (OK key).
X The initial stitch screen appears again.
0
Sew along the other edge of the frayed section
so that it looks like the previous stitching.
a
Set the mirror image pattern setting back to
.
■ Drawnwork (Example 2)
1
Pull out several threads from two sections of
the fabric, separated by an unfrayed section of
about 4 mm (3/16 inch).
1 4 mm (3/16 inch)
N N
1
S3_brotherE.book Page 106 Wednesday, February 12, 2003 11:49 AM