Brother CS-8150 - Manual (Page 115)

Sewing the Various Built-In Decorative Patterns 109
3
Combining patterns
Multiple patterns can be combined and sewn
together.
1
Select the first pattern, and then press
(OK key).
X The first pattern is selected and appears in
the LCD.
• When the sewing is started, the selected
pattern is sewn repeatedly until the sewing
machine is stopped.
2
Press the key in the operation panel.
X The screen for selecting a pattern appears
again.
3
Select the next pattern, and then press
(OK key).
To select a different stitch type, press
(stitch selection key).
X The combined patterns appear in the LCD.
• To remove a selected pattern, press the
key in the operation panel. The pattern that
was selected last is removed.
4
Repeat steps
2
and
3
.
5
After all of the desired patterns are selected,
start sewing.
1 Sewing direction
X The order that the patterns appear in the
LCD is the order that they will be sewn.
Memo
● Up to 70 patterns can be combined.
● Some utility stitches cannot be combined.
● If multiple patterns have been combined,
the sewing machine stops once all the
selected patterns displayed in the LCD have
been sewn. To repeatedly sew the
combined pattern, refer to “Repeat sewing
patterns”.
● The combined pattern can be stored for
later use. For details, refer to “Storing a
pattern” (page 113).
S3_brotherE.book Page 109 Wednesday, February 12, 2003 11:49 AM