Brother CS-8150 User Manual
Page 135
Troubleshooting 129
4
The fabric does
not feed.
The feed dogs are lowered.
Slide the drop feed lever to the left.
page 92
The stitch is too fine.
Lengthen the stitch length.
page 58
The presser foot that is used is not
appropriate for the type of stitch that
you wish to sew.
Attach the presser foot that is appro-
priate for the type of stitch that you
wish to sew.
page 118
The thread is tangled, for example,
in the shuttle.
Remove the tangle thread. If the
thread is tangled in the shuttle, clean
the shuttle.
page 124
The sewing lamp
does not come on. The sewing lamp is damaged.
Contact your retailer or the nearest
authorized service center.
–
Nothing appears
in the LCD.
The brightness of the LCD is either
too light or too dark.
Adjust the brightness of the LCD.
page 131
Symptom
Probable Cause
Remedy
Reference
S3_brotherE.book Page 129 Wednesday, February 12, 2003 11:49 AM