Brother NC-2010p - Manual (Page 124)

USER’S GUIDE
A-4
SET SERVIce <servicename> FMS <matchnumber>
Set service with specified match string number (see Appendix B)
SET SERVIce <servicename> FRS <replacenumber>
Set service with specified replacement string number (see Appendix B)
SET SERVIce IP <servicename> [EN|DIS]
E nable or disable IP jobs
SET SERVIce <servicename> NAme <newname>
Changes service name
SET SERVIce <servicename> RECeive [EN|DIS]
Set receive only mode on specified service
SHow FATal
Show fatal error log
SHow FREE
Shows memory available
SHow LOAD
Shows firmware update parameters
SHow PORt
Shows port parameters
SHow PORt <name> STA
Shows current port status.
SHow SERVEr
Shows server and LAT parameters
SHow SERVEr COunters
Shows server statistics
SHow SERVIce
Shows service Parameters
SHow TEstpage
Prints test page
SHow VErsion
Shows server firmware version
UNPROtect
Allows system manager to temporarily access SET commands when
remote console is in protected mode (See SET PROTECTION command).
The SET DEFAULT command can be used to permanently disable the
protected mode.
Zero
Zeroes statistical counts