Brother NC-2010p - Manual (Page 4)

USER’S GUIDE
ii
SCO UNIX Configuration 2-5
Other Non-Standard Configurations 2-6
IP Address Configuration 2-7
Using the printer front panel to allocate an IP address (printers with LCD panels only)
2-8
Changing the IP Address using the BRAdmin32 application 2-8
Using DHCP to Configure the IP address 2-10
Using arp to Configure the Print Server IP Address 2-11
Using rarp to Configure the IP Address 2-11
Using BOOTP to Configure the IP Address 2-12
Configuring the IP Address with NCP or BRCONFIG 2-13
Before attempting to print 2-15
IP Security 2-16
Raw TCP ports 2-16
CHAPTER 3
WINDOWS NT AND LAN SERVER NETWORK CONFIGURATION
(TCP/IP) 3-1
Windows NT(TCP/IP) Configuration 3-1
Configuring an IP address for the Print Server 3-3
Changing the IP Address using the BRAdmin32 application 3-3
Changing the IP Address using the ARP command 3-5
Windows NT Print Queue Configuration 3-6
Windows NT 4.0 Print Queue Configuration (Printer Driver already installed) 3-6
Windows NT 4.0 Print Queue Configuration (Printer Driver not installed) 3-7
Windows NT 3.5x Print Queue Configuration 3-8
LAN Server / Warp Server Configuration 3-10
Server Configuration 3-10
Programming an IP address for the printer 3-10
Configuration Server 3-12
CHAPTER 4
WINDOWS 95/98 PEER-TO-PEER CONFIGURATION 4-1
LPR method 4-1
Changing the IP Address using the BRAdmin32 application 4-1
Installing the Brother Network Direct Print Software 4-3
Associating to the printer 4-4
Adding a Second Network Direct Print Port 4-5
HP’s JetAdmin compatible method 4-6