Flow of intelligent function setting, Flow of intelligent function setting -10, Tting tool (p. 6-10) must be set – Canon VB-M700F User Manual

Page 86

Advertising
background image

6

-10

• [Detection Settings of the Same Type]

Show the detection areas or detection results for the

same type of detection settings as those selected in

the detection setting list.

• [Do not display]

No detection areas or detection results are shown.

8

[Restart intelligent function]
If the background image has changed while you were

specifying settings or detection results are not as set,

etc., click this button to restart the intelligent function.

9

[Detection Setting List]

A list with the specified detection settings is shown.

A

q

[Add]

The [New Detection Settings] dialog box is shown and

detection settings can be added.

A

a

[Delete]
Delete detection settings selected from the detection

setting list.

A

s

[Detection Setting Number], [Detection Type]
The detection setting numbers and detection types

selected from the [Detection Setting List] are shown.

A

d

[Enable these detection settings] checkbox

Select this checkbox to enable the detection settings

that are selected in the detection setting list.

A

f

[Detection Criteria] tab, [Event] tab
Switch between the Detection Criteria and Event tabs.

• [Detection Criteria]

Specify detection settings name, detection area,

and detection criteria (P. 6-11).

• [Event]

Specify operations to be performed when events

occur (P. 6-12).

A

g

[Restore settings]
Clear the settings you have specified on the screen of

the tool and restore the settings saved in the camera.

A

h

[Save settings]
Save the edited detection settings in the camera.

After the detection settings have been specified, be

sure to save the settings in the camera by clicking

[Save settings].

Flow of Intelligent Function Setting

The intelligent functions are set according to the

procedure below. For details on the setting method, see

each setting page.

When you click [Add] in the [Detection Setting List],

the [New Detection Settings] dialog box is displayed.

Set the [Detection Setting Number] and [Detection

Type] of the detection setting you want to add, and

then click [OK].

Up to 15 different detection settings can be

registered.

1

[Detection Setting Number]
Specify a detection setting number from 1 to 15 for the

detection area you want to set.

2

[Detection Type]
Select detection types that suit your purpose from

[Moving Object Detection], [Abandoned Object

Detection], [Removed Object Detection], or [Camera

Tampering Detection]. For details on detection types,

see P. 6-7.

To enable detection settings, select [Enable these

detection settings].

Clear this checkbox to disable a setting.

Set detection criteria while operating the camera and

checking the image in the image display area.

Set e-mail notification, upload, and audio playback to

be performed upon detection.

Click [Save settings] to save the settings in the

camera.

Important

It takes tens of seconds for the intelligent function to restart. No
detection is performed while restarting.

1

Add detection settings.

2

Enable Detection Settings.

3

Set detection criteria ([Detection Criteria] tab P. 6-11).

4

Set operations to be performed when a change in a
subject is detected ([Event] tab P. 6-12).

5

Save the detection settings in the camera.

1

2

Advertising
This manual is related to the following products: