P. 4-22), E p. 4-22 – Canon VB-M40 User Manual

Page 52

Advertising
background image

4

-22

Timer

1

[Timer Event Setting]

Select [Enable] or [Disable] for timer event.

2

[Start Time]

Set the start time of the timer event in 24-hour format.

3

[Repeat Setting]

If [Enable] is selected, timer events will be generated

according to settings in 4 [Repeat Interval], 5

[Repeat Count].

4

[Repeat Interval]
Select [1 sec.] [5 sec.] [10 sec.] [30 sec.] [1 min.] [5

min.] [10 min.] [15 min.] [20 min.] [30 min.] [1 hour] [3

hours] [6 hours] or [12 hours] for the upload and e-mail

notification repeat intervals.

5

[Repeat Count]
Set the repeat count for uploads and e-mail notification

in the range of 1 to 65535.

6

[Upload]

Select the upload operation to be performed. If

[Enable] is selected, upload is performed at the set

intervals. To use this function, the [General Upload]

sub-menu and [HTTP Upload] or [FTP Upload] sub-

menu must also be set from the [Upload] menu

(P. 4-15).

7

[E-mail Notification]
Select the e-mail notification operation to be

performed. If [Enable] is selected, e-mail notification is

performed when a timer event occurs. To use this

function, the [E-mail Notification] sub-menu must also

be set from the [Upload] menu (P. 4-17).

Sound Clip Upload

1

[Browse File]
Specify the audio file you want to register as the sound

clip, and then click [Add].

2

[Sound Clip Name]
Set a name for the audio file to be registered as the

sound clip (up to 15 alphanumeric characters). If a

blank field is applied, the sound clip will be deleted. To

delete a registered audio file, click [Delete] next to the

sound clip name you want to delete.

Note

Audio files must be 20 seconds or shorter and must be “.wav”
files (

μ-law PCM 8 bits sampling frequency 8000 Hz, monaural).

Important

[Timer Event Setting] repeats in a 24-hour cycle.

When valid times set by multiple [Timer Event Setting] overlap,
the timer event with the latest [Start Time] setting becomes

effective.

The previously performed timer event stops until its Start Time
on the next day.

Advertising