Safety precautions – Canon VB-M40 User Manual

Page 9

Advertising
background image

ix

The following explains the items that must be observed when using the VB-M40.

If they are not observed, injury, death and/or property damage may occur. Read the following information carefully and

observe the instructions without fail.

Important Warnings

Safety Precautions

Caution

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.

The AC adapter can be connected to VB-M40 from a

standard AC power outlet.

Please check your instruction manual to make sure that

your VB-M40 is compatible with this adapter.

• The socket-outlet should be installed near the

equipment and should be easily accessible.

• Unplug the equipment from the wall outlet before

cleaning or maintaining.

FDA regulation

This Network Camera has not been evaluated by the

Food and Drug Administration (FDA) for use as a

medical device. When incorporated into a system with

medical applications, FDA regulations may apply.

Therefore, please consult your legal advisor to

determine whether FDA regulations apply.

FCC NOTICE

Network Camera, Model Name: VB-M40

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions: (1)

This device may not cause harmful interference, and (2)

this device must accept any interference received,

including interference that may cause undesired

operation.

Note: This equipment has been tested and found to

comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against

harmful interference in a residential installation.

This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications.

However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does

cause harmful interference to radio or television

reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and

receiver.

• Connect the equipment to an outlet on a circuit

different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV

technician for help.

Use of shielded cable is required to comply with class B

limits in Subpart B of Part 15 of FCC Rules.

Do not make any changes or modifications to the

equipment unless otherwise specified in the manual. If

such changes or modifications should be made, you

could be required to stop operation of the equipment.

Canon U. S. A. Inc.

One Canon Plaza, Lake Success, NY 11042, U. S. A.

Tel No. (516) 328-5600

Canadian Radio Interference Regulations

This Class B digital apparatus complies with Canadian

ICES-003.

Advertising