Canon XA10 - Manual (Page 86)

Onscreen Displays and Data Code
86
Onscreen Displays and Data Code
You can turn most onscreen displays on or off.
Repeatedly press h to turn the onscreen displays on/off in the following sequence:
, mode:
• All displays on
• Most displays off
1
, mode 2 :
• Only data code on
• All displays on
1
Pressing h will turn off most of the icons and displays that
appear automatically but will not remove control buttons ([FUNC.],
[PHOTO], etc.) and onscreen displays that were turned on manually
(for example, onscreen markers or the audio level meter).
2
Touch the screen to display the playback controls.
Operating modes:
About the Data Code
With every scene or photo recorded, the camcorder keeps a data code (date/time of recording,
information about the camera setup, etc.).
You can select the information to be displayed with the y / z
[Data Code] setting.
COP
Y