Canon PowerShot G16 - Manual (Page 121)

121
1
2
3
4
5
6
7
8
9
10
Cover
Before Use
Common Camera
Operations
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting
Modes
Tv, Av, M, C1,
and C2 Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Basic Guide
P Mode
• If [Auto] does not produce the expected results, try correcting images using
[Low], [Medium], or [High].
Still Images
Correcting Red-Eye
Automatically corrects images affected by red-eye. You can save the
corrected image as a separate file.
1 Choose [Red-Eye Correction].
z z Press the < n> button, and then
choose [Red-Eye Correction] on the [ 1]
tab ( = 25 ).
2 Choose an image.
z z Press the < q><r> buttons or turn the
< 7> dial to choose an image.
3 Correct the image.
z z Press the < m> button.
z z Red-eye detected by the camera is now
corrected, and frames are displayed
around corrected image areas.
z z Enlarge or reduce images as needed.
Follow the steps in “Magnifying Images”
( = 109 ).
4 Save as a new image and
review.
z z Press the < o><p><q><r> buttons or
turn the < 7> dial to choose [New File],
and then press the < m> button.
z z The image is now saved as a new file.
z z Follow step 5 in “Resizing Images”
( = 119 ).
• Some images may not be corrected accurately.
• To overwrite the original image with the corrected image, choose
[Overwrite] in step 4. In this case, the original image will be erased.
• Protected images cannot be overwritten.
• RAW images cannot be edited this way.
• Red-eye correction can be applied to JPEG images shot in [ ], but
the original image cannot be overwritten.