Canon PowerShot G16 - Manual (Page 155)

155
1
2
3
4
5
6
7
8
9
10
Cover
Before Use
Common Camera
Operations
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting
Modes
Tv, Av, M, C1,
and C2 Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Basic Guide
P Mode
Date-Based Image Storage
Instead of saving images in folders created each month, you can have the
camera create folders each day you shoot to store shots taken that day.
z z Choose [Create Folder], and then choose
[Daily].
z z Images will now be saved in folders
created on the shooting date.
Metric / Non-Metric Display
Change the unit of measurement shown in the zoom bar ( = 29 ), the MF
indicator ( = 78 ), GPS information for elevation ( = 146 ), and elsewhere
from m/cm to ft/in as needed.
z z Choose [Units], and then choose [ft/in].
Electronic Level Calibration
Calibrate the electronic level if it seems ineffective in helping you level the
camera.
1 Make sure the camera is level.
z z Place the camera on a flat surface, such
as a table.
2 Calibrate the electronic level.
z z Choose [Electronic Level], and then press
the < m> button.
z z To adjust left/right tilt, choose [Horizontal
Roll Calibration], and to adjust forward/
backward tilt, choose [Vertical Pitch
Calibration], followed by the < m> button.
A confirmation message is displayed.
z z Choose [OK], and then press the < m>
button.
Resetting the Electronic Level
Restore the electronic level to its original state as follows. Note that this is
not possible unless you have calibrated the electronic level.
z z Choose [Electronic Level], and then press
the < m> button.
z z Choose [Reset], and then press the
< m> button.
z z Once the electronic level has been reset,
the menu screen is displayed again.