Canon PowerShot G16 - Manual (Page 141)

141
1
2
3
4
5
6
7
8
9
10
Cover
Before Use
Common Camera
Operations
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting
Modes
Tv, Av, M, C1,
and C2 Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Basic Guide
P Mode
Connecting to Another Camera
Connect two cameras via Wi-Fi and send images between them as follows.
• Only Canon-brand cameras equipped with a Wi-Fi function can be connected
to wirelessly. Even Canon-brand cameras that support Eye-Fi cards cannot
be connected to if they do not have a Wi-Fi function. You cannot connect to
PowerShot SD430 DIGITAL ELPH WIRELESS/DIGITAL IXUS WIRELESS
cameras with this camera.
1 Access the Wi-Fi menu
( = 133 ).
2 Choose camera.
z z Press the < o><p><q><r> buttons or
turn the < 7> dial to choose [4], and
then press the < m> button.
3 Choose [Add a Device].
z z Press the < o><p> buttons or turn the
< 7> dial to choose [Add a Device], and
then press the < m> button.
z z Follow steps 1 – 3 on the target camera
too.
z z Camera connection information will be
added when [Start connection on target
camera] is displayed on both camera
screens.
z z When the target camera has been added
successfully, the image transfer screen
will be displayed. Proceed to “Sending
Images” ( = 142 ).
• To add multiple cameras, repeat the above procedures starting from step 1.
• Once a camera is added, the camera name will be displayed on the screen in
step 3. To connect to a camera again, simply choose the camera name from
the list.