Canon imagePROGRAF iPF6450 - Manual (Page 154)

Other Messages Other Messages
GARO Wxxxx (x represents a number) ............................................................................................................... 154
ERROR Exxx-xxxx (x represents a letter or number) .................................................................................... 154
Hardware error. xxxxxxxx-xxxx (x represents a letter or number) .......................................................... 154
Prepare for parts replacement. .............................................................................................................................. 154
Parts replacement time has passed. .................................................................................................................... 155
Unknown file. .................................................................................................................................................................. 155
Calibration There is a problem with the multi-sensor. .................................................................................. 155
Multi-sensor error ......................................................................................................................................................... 155
Roll feed unit error. ...................................................................................................................................................... 137
No Roll Unit. .................................................................................................................................................................... 137
GARO Wxxxx (x represents a number) GARO Wxxxx (x represents a number)
Cause Corrective Action
There is a problem with the print job. Try printing again, using the correct printer driver.
It is also possible to continue printing in this state.
However, you may not be able to obtain the desired printing results.
ERROR Exxx-xxxx (x represents a letter or number) ERROR Exxx-xxxx (x represents a letter or number)
Cause Corrective Action
An error requiring service may have occurred. Write down the error code and message, turn off the printer, and contact your Canon
dealer for assistance.
Hardware error. xxxxxxxx-xxxx (x represents a letter or number) Hardware error. xxxxxxxx-xxxx (x represents a letter or number)
Cause Corrective Action
The last portion of roll paper was used during a print job. The paper was
not advanced because the trailing edge is taped to the roll. Turn off the printer and remove the roll from the printer before
restoring power.
Fastening tape or the Belt Stopper has not been removed inside the Top
Cover. Turn off the printer, open the Top Cover and remove the tape
or the Belt Stopper before restoring power.
An error requiring service may have occurred. Turn off the printer and wait at least three seconds before re-
storing the power.
If the message is displayed again, write down the error code
and message, turn off the printer, and contact your Canon
dealer for assistance.
Prepare for parts replacement. Prepare for parts replacement.
Cause Corrective Action
It is almost time to replace consumables for
which service is required. If "Parts replacement time has passed." is displayed, you can continue to use the printer
for some time.
Contact your Canon dealer for assistance.
GARO Wxxxx (x represents a number) iPF6450
Basic Guide
Error Message
Other Messages
154