Acer Altos G500 - Manual (Page 75)

65
Level 1 Cache Total amount of first-level or the internal fast
accessed memory size (i.e., the memory integrated
into the CPU)
Level 2 Cache Total amount of second-level cache memory size
that comes with the CPU. The available cache sizes
are 256 or 512 KB.
Floppy Drive A
Floppy Drive B System’s current diskette drive A and drive B
settings
IDE Primary
Channel Master Current configuration of the IDE device connected
to the master port of the primary IDE channel
IDE Primary
Channel Slave Current configuration of the IDE device connected
to the slave port of the primary IDE channel
IDE Secondary
Channel Master Current configuration of the IDE device connected
to the master port of the secondary IDE channel
IDE Secondary
Channel Slave Current configuration of the IDE device connected
to the slave port of the secondary IDE channel
Total Memory Total amount of onboard memory. The memory
size is automatically detected by BIOS during the
POST. If you install additional memory, the system
automatically adjusts this parameter to display the
new memory size.
1st/2nd/3rd bank Type and size of DRAM installed in DIMM sockets 1,
2, and 3 respectively. The None setting indicates
that there is no DRAM installed
Serial port 1 Serial port 1 address and IRQ setting
Serial port 2 Serial port 2 address and IRQ setting
Parallel port Parallel port address and IRQ setting
PS/2 mouse Pointing device installation setting. Displays None
if no pointing device is installed
Parameter Description
AA G500.book Page 65 Thursday, September 13, 2001 6:56 PM