Acer Altos G500 - Manual (Page 93)

83
3 Retype the password to verify your first entry then press Enter.
4 Highlight the Set or Change Password option then press Enter.
5 Press Esc to return to the System Security screen.
6 Press Esc to exit Setup. The Exit Setup screen appears.
7 Choose Yes to save your settings and exit Setup. Your password
will be saved to CMOS.
Removing a password
To remove your Supervisor/User password:
1 Disable the Supervisor Password or User Password parameter in
the System Security menu by pressing the up or down arrow key
to select None.
2 Press Esc to return to the System Security menu.
3 Press Esc to exit Setup. The Exit Setup screen appears:
4 Choose Yes to save your settings and exit Setup. Your previous
password will be removed from CMOS.
AA G500.book Page 83 Thursday, September 13, 2001 6:56 PM