Canon REALIS SX80 MARK II - Manual (Page 14)

C4
CHAPTER 2 • Routine Operation
Enter a projector group name, and place a check mark beside necessary
2
projector parameter categories and enter its conditions for classification.
It will be a "Status group" if more than one condition is specified, and a "User group" if
none is specified.
Category Description
Projector group
name Enter a name within 40 one-byte characters.
Product name Enter a product name of the projector.
Projector name Enter any name of a projector in two-byte or one-byte characters.
Location Enter a location of the projector in two-byte or one-byte characters
Status Select a status of the projector from "Disconnected", "Power off",
or "Power on".
Warning Select a warning status of the projector from "Yes" or "No".
Lamp Select a status of the lamp from "Normal", "Obtain a new lamp",
"Replace with the new lamp", "Obtain or replace with the new
lamp", or "Warning".
Lamp Time
(converted) Select from "over" or "less than", and enter a number from 0 to
99999 for lamp usage time.
Filter Select a status of the filter from "Normal", "Cleaning the air filter",
"Replacing the air filter" or "Cleaning or replacing the air filter".
Air filter time Select from "over" or "less than" and enter a number from 0 to
99999 for air filter usage time.
Click [OK] when you have completed entering the conditions.
3
Projector group is now added in the Projector group list.
COP
Y