Canon REALiS SX60 - Manual (Page 105)

105
SE
TTING
UP FU
NCTIO
N
S FROM MEN
U
S
Setting the Image Quality
Making Color Adjustment (1) (SX7 II)
[Color adjustment]
You can adjust color level and color balance and
make color adjustment for each color (red,
green, and blue).
T
T
* You can set this if you have selected [Photo]
for [Image mode].
Press the [MENU] button when you finish.
Making Color Adjustment (2)
[Color adjustment]
* is only applicable to SX60
You can make color adjustment for each color
(red, green, and blue).
T
T
Press the [MENU] button when you finish.
Image adjustment
Color adjustment
Adjusts the color temperature of the
image.
[>] Changes to the blue color (cold
color).
[<] Changes to the red color (warm
color).
Adjusts the intensity of each color.
[>] Increases the color intensity.
[<] Decreases the color intensity.
Adjusts the color reproducibility of
dark portions of each color.
[>] Increases the color reproducibil-
ity of color.
[<] Decreases the color reproduc-
ibility of color.
z This setting is saved for the currently
selected input signal and image
mode.
z If you change R/G/B Gain or Offset
once color temperature has been
specified, the "*" mark is displayed at
the right side of the setting value to
indicate the color temperature has
been specified.
DIGITAL PC ANALOG PC
Color temperature*
R/G/B Gain
R/G/B Offset
Image adjustment
Color adjustment
(Refer to "Making Color Adjustment
(1)")
(Refer to "Making Color Adjustment
(1)")
z This setting is saved for the currently
selected input signal and image
mode.
DIGITAL PC * ANALOG PC *
DIGITAL VIDEO SCART
R/G/B Gain
R/G/B Offset