Canon REALiS SX60 - Manual (Page 67)

67
PRO
JE
CTIN
G
AN IMAGE
FROM A
V
EQU
IPME
NT
Connecting to AUDIO IN Terminals (SX7 II)
Connect an audio cable to the AUDIO IN terminal corresponding to the input image signal
if you want to use the projector’s speaker.
z The speaker outputs the audio signal corresponding to the selected image signal.
z Use an audio cable without a built-in resistor. Using an audio cable with a built-in resistor
turns down the sound.
z Connect the audio cable between the AUDIO OUT terminal and an external audio-visual
equipment if you want to output the audio signal to the audio-visual equipment (P68).
z The built-in speaker is monaural.
Audio cable
AV equipment
Projector
Commercial audio cable
AUDIO OUT terminal
(RCA terminal) (Stereo mini jack)
(Stereo mini jack) (RCA/Stereo
mini jack)
Audio input terminal
(AUDIO IN)
for DEGITAL IN/ANALOG IN-1
SX7 MarkII
for ANALOG IN-2
for VIDEO IN/S-VIDEO IN
You can input an audio signal
corresponding to 3 image
input systems.
Connect to the AUDIO IN ter-
minal corresponding to the
type of the input image signal.