Canon REALiS SX60 - Manual (Page 73)

73
PRO
JE
CTIN
G
AN IMAGE
FROM A
V
EQU
IPME
NT
Selecting a Screen Mode (Aspect)
You can select one of the following screen modes depending on the aspect ratio of your AV
equipment or content software.
z You can specify the aspect ratio from the menu. Refer to [Aspect] in the menu (P90,
91).
z The available screen mode will be different depending on the setting of [Screen
aspect]. Refer to the section [Screen aspect] for details (P74).
„ Full screen
Select this to project a video image with aspect
ratio of 4:3.
[Full screen] will be disappeared from the menu
screen if you select [16:9] or [16:9 D. image shift]
for [Screen aspect].
„ 4:3
Select this to project a screen with aspect ratio of
4:3 on the 16:9 screen if you have selected [16:9]
or [16:9 D. image shift] for [Screen aspect].
„ Wide
Select this to project a video image with aspect
ratio of 16:9.
„ Auto ([DIGITAL VIDEO]/[COMPONENT])
Select this to switch between [Full screen] and
[Wide] automatically in accordance with the video
image.
z Refer to the table on the page 133 for more
detailed information on the screen size for the
wide screen.
z The upper, lower, left and right portions of a
projected image may be missing depending
on the [Aspect] setting.