Canon REALiS SX60 - Manual (Page 91)

91
SE
TTING
UP FU
NCTIO
N
S FROM MEN
U
S
Setting Display Status
Selecting a Screen Mode (3)
[Aspect]
You can adjust the aspect ratio of the image pro-
jected on the screen.
T
T
Press the [MENU] button when you finish.
Selecting an Input Signal Type (1)
[Input signal select]
You can select a desired input signal type if the
auto PC adjustment function detects more than
one input signal types.
T
T
Select an input signal type suitable for the com-
puter from the displayed signal types.
Press the [MENU] button when you finish.
Display settings
Aspect
Projects a normal image with aspect
ratio of 4:3 on the screen with
aspect ratio of 4:3.
Projects an image with aspect ratio
of 4:3 within the screen with aspect
ratio of 16:9.
Projects a video image with aspect
ratio of 16:9.
z Each item may become unavailable
depending on the setting of [Screen
aspect].
VIDEO/S-VIDEO SCART
Full screen
4:3
Wide
Display settings
Input signal select
z See P132 for the signal types sup-
ported by this projector.
ANALOG PC