Audiovox CDM-4000 - Manual (Page 12)

12
BATTERY INSTALLATION
AND RECHARGING
BATTERY INSTALLATION
AND RECHARGING
To Attach the Battery Pack
1 Insert the hook at the end of the Battery Pack into
the slot at the end of the phone.
2 Press the Battery Pack down to lock the Battery Pack
onto the phone.
1
2
1
2
Release Latch
To Detach the Battery Pack
1 Slide back the Release Latch as shown below.
2 Lift up to remove the Battery Pack from the phone
gently.
To Recharge Battery
Your CDM-4000 has a built-in charger function. To re-
charge the Battery Pack, always install the Battery Pack
to the Phone.
1. Attach the Battery Pack to the Phone.
2. Insert the DC plug of the AC Adapter (CNR-4000)
to the Desktop Holder (DTH-4000). Plug the AC
Adapter to AC outlet.
3. Place the Phone with Battery Pack into the Desk-
top Holder.