Audiovox CDM-4000 - Manual (Page 63)

63
To Place a Call with the Manual PIN Entry
1. Enter the number you are calling, or recall the
number from a specific memory location.
2. Press . Your call will be processed. Listen
for a double beep, which will prompt you to send
your PIN.
3. Enter your PIN number, and press . Your
call will then be placed.
To Place a Call with the Automatic PIN Feature
1. Enter the number you are calling, or recall the
number from a specific memory location.
2. Press “SEND” key . As your call is being
processed, you will have
the display:
3. Press “SEND” key again. Your call will then
be placed.
Note: Before you can use this feature, you must pro-
gram your PIN and turn the Automatic PIN fea-
ture on. (See procedures below.)
To Place a Call to Voice Mail using the
Automatic PIN Feature
(See Voice Mail Dialing on page 44.)
1. Press V for more than one second. As your call
is being processed, you
will have the display:
2. Press V again, your PIN will be sent.
3. Press V again. The second number stored in
V will be sent in Touch Tone™ signals. The sub-
sequent numbers, if any, can be sent sequentially
by pressing V .
To Turn the Automatic PIN Feature On/Off (F54-5)
1. Press F 5 JKL 4 GHI
and
5 JKL
.
2. You can turn this feature on/off by or .
3. Press F to set.